AWSJTdCJTIydGl0bGUlMjIlM0ElMjJBV1MlMjIlN0Q=

:warning:atlassian-warning#FFEBE6

Warning

If you created your VPC using the NAT Gateway, then ensure that the Kyvos Web Server machine is accessible from your computer network.

If not, you need to perform any of the following.

Accessing Kyvos Manager

From the Outputs page, copy the KMAccessUrl and log into the Kyvos Manager using the credentials as admin | admin.

You will be redirected to the Change Password page.

Once you change the password, re-login to access the Kyvos Manager.

Here you can view the status of Kyvos installation. Once the installation is done (usually takes 10 -15 minutes), you can access the Kyvos web portal and start creating your semantic models.

Accessing Kyvos

To access Kyvos use the following URL:
http://<KM IP>:8081/kyvos

Here, replace KM IP with the IP address of the Kyvos Manager displayed on the Outputs tab.

Alternatively, navigate to the Kyvos Manager dashboard, and select the Launch Web Portal option from the Actions menu corresponding to the Web Portal, as shown in the following figure.

A password change dialog box is displayed. The default password is Admin. If you don’t see the Change Password menu choice, you are using an LDAP account.

Enter the current password, the new password, and confirm the new password. Click Change.

See Password guidelines for details on choosing a password.

:note:atlassian-note#DEEBFF

Note

You can enable or disable this change password dialog displayed on the first-time login, using the allowChangePasswordOnFirstLogin property in the portal.properties file.

:info:atlassian-info#FFFAE6

Important

Once the cluster is deployed, run the Sanity suite inbuilt with Kyvos Manager to validate the correct working of all the components in the system.

Azure JTdCJTIydGl0bGUlMjIlM0ElMjJBenVyZSUyMCUyMiU3RA==

Accessing Kyvos Manager

From the Outputs page, copy the KMAccessUrl and log into the Kyvos Manager using the credentials as admin | admin.

You will be redirected to the Change Password page.

Once you change the password, re-login to access the Kyvos Manager.

Here you can view the status of Kyvos installation. Once the installation is done (usually takes 10 -15 minutes), you can access the Kyvos web portal and start creating your semantic models.

Accessing Kyvos

To access Kyvos use the following URL:
http://<KM IP>:8081/kyvos

Here, replace KM IP with the IP address of the Kyvos Manager displayed on the Outputs tab.

Alternatively, navigate to the Kyvos Manager dashboard, and select the Launch Web Portal option from the Actions menu corresponding to the Web Portal, as shown in the following figure.

A password change dialog box is displayed. The default password is Admin. If you don’t see the Change Password menu choice, you are using an LDAP account.

Enter the current password, the new password, and confirm the new password. Click Change.

See Password guidelines for details on choosing a password.

:note:atlassian-note#DEEBFF

Note

You can enable or disable this change password dialog displayed on the first-time login, using the allowChangePasswordOnFirstLogin property in the portal.properties file.

:info:atlassian-info#FFFAE6

Important

Once the cluster is deployed, run the Sanity suite inbuilt with Kyvos Manager to validate the correct working of all the components in the system.

GCPJTdCJTIydGl0bGUlMjIlM0ElMjJHQ1AlMjIlN0Q=

Accessing Kyvos Manager

From the Outputs page, copy the KMAccessUrl and log into the Kyvos Manager using the credentials as admin | admin.

You will be redirected to the Change Password page.

Once you change the password, re-login to access the Kyvos Manager.

Here you can view the status of Kyvos installation. Once the installation is done (usually takes 10 -15 minutes), you can access the Kyvos web portal and start creating your semantic models.

Accessing Kyvos

To access Kyvos use the following URL:
http://<KM IP>:8081/kyvos

Here, replace KM IP with the IP address of the Kyvos Manager displayed on the Outputs tab.

Alternatively, navigate to the Kyvos Manager dashboard, and select the Launch Web Portal option from the Actions menu corresponding to the Web Portal, as shown in the following figure.

A password change dialog box is displayed. The default password is Admin. If you don’t see the Change Password menu choice, you are using an LDAP account.

Enter the current password, the new password, and confirm the new password. Click Change.

See Password guidelines for details on choosing a password.

:note:atlassian-note#DEEBFF

Note

You can enable or disable this change password dialog displayed on the first-time login, using the allowChangePasswordOnFirstLogin property in the portal.properties file.

:info:atlassian-info#FFFAE6

Important

Once the cluster is deployed, run the Sanity suite inbuilt with Kyvos Manager to validate the correct working of all the components in the system.

Accessing Kyvos Manager and Kyvos